Z1 Frontier / Pathfinder / Xterra VQ40 Billet Heater Hose Inlet

Quality and a very cool item for a safe upgrade from factory plastic inlet.

Sturdy build. Easy better than stock

Perfect fit and perfect materials.

I replaced the inlet today and got the Dorman 626-598 outlet hose assembly. As soon as I started to remove the inlet and outlet, the plastics on both began to crumble and disintegrate. Glad I did this as it could have broke at any time. No more plastics and all metal. This combo is solid, Thanks Z1 Off-Road!!!

Worth its weight in gold for peace of mind when you travel like I do and don’t want to get stranded on a piece of plastic cracking.

Works great fast shipping more than pleased with product

Replaced this along with hoses and clamps. 12 year old Frontier getting a parts refresh. This item is well manufactured, The price might seem high, but you can tell where the money was spent on the billet aluminum. Sticker overload with all the parts coming in.

Perfect fit, quick and easy swap out of the inferior part that comes with the vehicle. Highly recommend this one to anybody that has a Nissan Xterra, as their OEM part will be failing if it has not already.

Almost 2 years installed and without problems, this is the solution to replace the crappy oem plastic

I bought 2 of these for my daughters XTerra’s, one is a 2008, the other a 2010. I bought them after the 2010 blew the heater core outlet pipe. I installed one this weekend on the 2010. I removed the old plastic part and the end where the hose and hose clamp were at broke off inside the hose. I was thankful I changed the part, the 2008 will be changed next. The bleed port is the cats meow, super easy to bleed the system. I give this part 10 stars👍🏿🇺🇸🇺🇸

Another must have from Z1. I feel much more confident on my Xterra with the flimsy plastic inlet hose being replaced with this one. The part is sturdy and solid, makes bleeding the system simple.

Great product! Install was a breeze. Heard the horror stories and figured I would get ahead of it.

Awesome fix for what Nissan should have used something similar when built. Oh well, Z1 for for the rescue for a factory OOPS 🙊 ,

Highest quality replacement part available for the frequently broken or cracked plastic XTerra heater hose inlet.

5 minute swap and now I don't have to worry about the original piece breaking and leaving me stranded. Thanks for simple, easy to install part.

Looks great. Nice having a bleed at the top if need be. I found just overfilling the expansion tank an inch or so solves any air in the system issues. Shipping was uber fast. They already had it shipping the morning after I ordered (which I'd done around 2300 my time, west coast). It was at my door two days later. From the USA to Canada was quick, quick, quick!

So glad someone made an upgraded version of this! Easy replacement for a commonly broken part!

Used in conjunction with dorman 626-598 to clear out all the delicate plastics in the cooling system. bleeder valve was a wonderful time saver

Amazing service and product

Great upgrade when Oem part broke on uninstall. Would recommend.

This is a must do upgrade. Just buy it and quit worrying about that ticking time bomb OEM one.

It saved me 15 minutes of burping the system of all air. Worth every penny.

Seems to have cleared my issue.

Love the bleeder, and good quality material

Great Item! Just what I needed!

After my heater pipe blew, replaced the entire cooling system. This is a must have.

This was a no brainer when doing my cooling system overhaul this past summer. Fit was perfect, and made bleeding the system even easier. 10 out of 10 on this one boys. You knocked it out of the park.

Made bleeding the coolant system a breeze compared to how it used to be done

I bought this as a suggested add on. I'm happy I did because mine crumbled as soon as I touched it. Do the upgrade now

Works great! Heavy duty replacement for cheap OEM design.

I love the aluminum, much better than the OEM plastic that was crumbling apart.

Great coolant system air bleeder. Very happy with the product and the shopping experience at Z1.

I haven't installed the part yet, but this was recommended to me by a Nissan engineer of one of the parts to have on hand or replace. So, now I just need to get it installed!

Excellent piece, some people see it as unnecessary, I was missing having the z1 silicone hoses, good material.

Extremely nice. Definitely recommend this upgrade.

Very easy and straightforward to install. Worth the piece of mind over the factory plastic inlet.

This is brilliant and if you pair this with Dorman part 626-598 it basically makes the 4.0 bullet proof. Between the 2 items it removes all the plastic from the cooling system that is prone to breaking. The bleeder built is also a nice touch and so much easier then the various other methods used to bleed the cooling system IMO this is a must have upgrade for the Frontier 4.0.

Worked great on my 2010 Xterra, my goal was to pre-emptively replace the crappy plastic OEM parts with this inlet and the metal dorman outlet assembly, as well as do a drain and fill of the coolant. Here is how I used this inlet (I am not a professional mechanic, use these tips at your own risk): - Ensure vehicle is level and engine cold / cool - Drain coolant by removing the drain plug on the radiator - Take off radiator cap - Once drained, remove the inlet (and in my case, outlet assembly) - Note: I had to use a razor blade on the factory inlet hose to get it off - Install new inlet (and in my case, outlet assembly) - Ensure radiator drain plug is back in place - Open the bleeder valve on the heater hose (it just needs to be open enough to allow air to escape) and put a shop towel under it as a little coolant will seep out - Add coolant to the radiator (I used Nissan 50/50 blue) and watch both the filler neck of the radiator as well as the bleeder valve on the inlet - When coolant starts to come out of the bleeder valve, close it - Keep filling until radiator is completely full - Gently squeeze the radiator hose on the left side of the radiator to get air bubbles out (this will be repeated throughout the process) - Ensure coolant reservoir is filled to the max cold line. - Start engine with radiator cap off, let it run until reaches operator temperature so that the thermostat opens - Squeeze radiator hose again 10 times to get bubbles out, slowly rev engine to 2500rpm and hold for 5 seconds, do this 5 times - Turn off engine, wait 5 min, add more coolant to full. Replace radiator cap. - Check radiator level (while cold) and monitor the reservoir over the next few days and add more as needed. I think there is a way to more efficiently use this bleeder valve than I did, but it seemed to work.

easy and quick install. item is as described. much more sturdy than the oem.

Part is as described. Haven't installed yet as the Frontier is fairly new. Picked this up for future insurance. Prompt processing and shipping. Excellent experience ordering from Z1!

Well-made product, easy to install. Unfortunately, no information was provided on how to incorporate the bleeder into the process of bleeding the air from the system, and an email to the company only received a suggestion to "take it to a professional mechanic."

This is a great upgrade for Nissan frontier and also a very easy to install highly recommended

I decided to change this preemptively rather than waiting on the plastic one to crack, and I'm so glad that I don't have to risk the stock plastic inlet failing now. The build quality is very good, and the addition of the bleeder makes it so much easier to ensure that you get ALL of the air out of the cooling system and heater core when servicing the cooling system.10/10 would buy again.

I like the added air purging screw. Very well made.

Heavily built, and much better then the plastic part it replaced. Bought for the bleed as the OE plastic can be removed and the hose connected directly to the connection at the fire wall. Nissans plastic is not necessary as all, just a bomb waiting to go off. Bill

Customer service was very helpful in ordering the correct part. Shipping was fast and well packaged. It would nice if instructions on how to bleed the air out correctly using this replacement fitting.

Great custom piece of bleed hardware that I have been wanting for a long time. Perfect for the DIY mechanic doing his/her own maintenance. Thanks for making available this great product.

Easy install. Way worth it !!!

This is a great idea. Eliminates a common problem with the Nissan's. Now all we need is someone to make a upper intake manifold so it would be easier to change spark plugs.

Super fast shipping and we'll packaged.

Just the fact that this makes bleeding the cooling system so darn easy makes is worth the price. Just back our the screw a few turns and the groove in the threads allow trapped air out without removing the screw all the way. when coolant seeps out tighten screw and job done, Installs easily and It's obviously vastly stronger than a cheapo plastic fitting. I go out in the boonies and want nothing to go wrong. one more way to bullet-proof my xterra.

A must on these trucks the plastic piece always breaks. This will never break!

great upgrade versus the OEM plastic junk, well worth the cost, thanks Z1.

It’s metal. It’s got a bleeder port in it. It’s nice.

Perfect fit , the shop that installed this also put a radiator and another piece in thus replacing the plastic heater hose fitting's in a 15 year old Xterra . They were happy with the bleed valve . As with anything time will be the real test ; but as of right now I would recommend !!

Great quality, much better than the plastic piece that came with the truck. Great price also!