Product Description
As 350Z’s and G35’s are getting older, the OEM bushings are failing on many cars. To replace a single bushing with OEM parts, an entire new suspension arm must be purchased. Solid hemispherical bearings can be purchased at a higher price for the same application but because of their harshness they are not always the best choice for daily driven cars.
We offer urethane bushings to replace your busted or worn stock bushings that will still deliver suitable ride quality, but are a bit firmer to accommodate performance driving. Don't replace busted OE bushings with more OE bushings that will fail again, when the Energy Suspension bushings will last the life of the car and offer increased performance, all for less price.
This kit includes three sets of bushings that are the most common to fail.
Note: These Bushings do not fit the AWD G35 models!
If you've lowered your 350Z or G35, it's only a matter of time before these bushing will have to be replaced. Z1 Motorsports offers all of these bushings separately or together in this package for a discounted price. This kit does not include the front upper control arm bushings which are not as prone to failure and not necessary for those who have aftermarket adjustable front upper (camber) arms. If you are interested in purchasing those bushings also we offer the complete front set HERE.
 |
Z1 Motorsports Zino Air Freshener
starstarstarstarstar_half (68)
$4
2 Bolt Exhaust Gasket
starstarstarstarstar_half (38)
$7.99
Energy Suspension Formula 5 Pre Lube - 8oz Tub
$16.22
OEM Long Life Blue Coolant (Antifreeze) - 50/50 Pre-Mixed
starstarstarstarstar (57)
$19.32
OEM Nissan Oil Filter
starstarstarstarstar (26)
$6.47
Z1 10mm Ratcheting Keychain Wrench
starstarstarstarstar (25)
$9.99
Dobinsons Frontier / Xterra Leaf Spring Shackle Bushing Kit
starstarstarstarstar_half (9)
$90
ARB / OME Frontier / Xterra Rear Leaf Spring Bushing Kit - OE Shackle
starstarstarstarstar (4)
$35.95
Whiteline Frontier / Pathfinder / Xterra Steering Rack Bushing Kit
$42.88
ARB / OME Frontier / Xterra Rear Leaf Spring Bushing Kit -GS15 Shackle
starstarstarstarstar (3)
$34.95
Prothane Nissan / Infiniti Front Sway Bar Bushings - Red (Pair)
$14.97
SPC Frontier / Pathfinder / Xterra Upper Control Arms Bushings
$79.55
starstarstarstarstar
Kren
November 30, 2024
These are great. Even reduced some of the road noise.
starstarstarstarstar
SEAN
August 29, 2024
Drives like a new car, got compression arms and that klunk finally went away!
starstarstarstarstar
Andrew
July 4, 2024
Don’t classify myself as a mechanic but this was honestly a super easy install and removal of old bushings you could use a bushing removal tool but i used what i had tool wise
-hole saw or drill bit to cut out the old rubber bushing
-sawzall to cut a line down the outter sleeve
-hammer and flat head screw driver to push out outter old bushings sleeve and hammer to help press new z1 bushings in
starstarstarstarstar
Aaron
April 24, 2024
Ez install and good handling
starstarstarstarstar
Phil
October 16, 2023
Tightened up my steering up!
starstarstarstarstar
Garrett
August 28, 2023
Easy install and my front end feels tighter and more sensitive. Great but overall.
starstarstarstarstar
RANDALL
July 27, 2023
Great alternative to replacing the entire arms. Overall, removal of the old bushings was much more difficult than installing the new. Tip for the shock mount bushing: After removing the old one, clean the surfaces and notice that one side has a small taper. Use a Dremel or die grinder to make a similar taper on the other side of the hole. This will allow a tiny bit of expansion which makes it easier to get the male side of the bushing into the female.
starstarstarstar_borderstar_border
Nick
May 31, 2023
Installed the bushings they work fine no squeaking, front end feels a little tighter. Easily can be pressed by hand EXCEPT the shock mount bushings. My advice to you is to save yourself the time, money and frustration and don’t even bother with them the others are fine though.
starstarstarstarstar
Bobby
July 16, 2022
Due to age of our cars these are a must have. Recommend getting a hydraulic press from harbor freight, definitely make the job much easier.
starstarstar_borderstar_borderstar_border
TJ
March 24, 2022
As of now, cant get these in to save my life, super frustrating, one would think that these would be perfectly measured for a snug fit. Going to try to freeze the ribbed pieces to see if that helps as youtube suggests! Should definetly be suggested by Z1 in the first place if thats what does the trick. If you buy these go ahead and do that first to save yourself the stinging feeling of defeat from trying to install them straight out of the bag. Im a grease covered loser right now :'[
starstarstar_borderstar_borderstar_border
Jonathan
November 8, 2021
This was in one of my first orders with Z1 after buying my 350Z a few months ago. I deeply regret buying this kit and have thrown all the pieces away to replace with SPL bushings. I'm steering clear of Energy Suspension (aka "Z1") bushings now. At first, I thought this was a good budget option since I wasn't committed to buying SPL at the time, but learned my lesson. When I finally bought a shop press to push out the deeply flawed shock mount bushing which was jammed into the LCA (and STILL not seated) I saw how soft this "polyurethane" is. It's cheap for a reason; you get what you pay for. Better to use OEM or Nismo bushings than these.
starstarstarstar_borderstar_border
Jonathan
September 18, 2021
The shock mount bushing is a flawed design that is impossible to install without modifying the pieces. I should not have to cut the polyurethane to get it installed. The other two bushings don't have this problem. 1 star for the shock mount bushing. I'm very unhappy with this part and will be replacing it.
starstarstarstar_borderstar_border
Cameron
August 24, 2021
The non-ribbed bushings went in fine, but the ribbed strut mount bushings would not go all the way in no matter what I tried. Unsure if this will affect anything but this derailed my suspension install.
starstarstarstarstar
Brayden
July 22, 2021
Perfect for my application! No need to spend the extra money for the energy kit with the UCA bushings i dont need.
starstarstarstarstar
Eric
July 4, 2021
The compression arm bushings made a HUGE difference.
starstarstarstarstar
Jonathan
April 9, 2021
Exactly what i was looking for. Great product. Car drives and handles so much better. Will be getting the rear diff bushing soon.
starstarstarstarstar
Anthony
February 10, 2021
Big difference compared to the stock bushings. Installed them close to a month now. To early to tell but so far I like the product and would recommend.
starstarstarstarstar
Bobby
February 10, 2018
Having purchased a 2005 g35 sedan 6mt with 93k miles, the front bushings were toast. Needing to keep things as close to stock with a little upgrade, due to the nature of living off the beaten path, i went with this kit. I cannot express how much better this made the car feel and respond. The Z1 team had been a pleasure to deal with answering any questions I've had and i would recommend to anyone utilizing their parts and services for your Infiniti/Nissan needs.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF