Cooler intake air charge equates to more horsepower. Now you can monitor your intake air temperature using the new AEM AIT Air Temperature Sensor. 

Includes:

• (1) AEM AIT Temperature Sensor
• (1) 3/8 NPT Aluminum Weld On Bung
• (2) Wire Terminals
• (1) Weatherproof Connector

Sensor Specifications:

• Accuracy: < 1.5°C / 2.7°F
• Operating Temp: -40C to 135C / -40F to 275F
• Resistive Range (Ω): See Table
• Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
• Sensor Body Material: Brass
• Thread: 3/8" NPT
• Hex Size: 3/4"
• Installation Torque: 20Nm / 15 ft-lbs
• Weight: 33.3g
• Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals

AEM AIT Sensor Product Data

AEM AIT Sensor Install Instructions