Z1 engine tunes do not disable emissions control systems or the onboard diagnostic (OBD) system. The customer is responsible for ensuring the hardware they are using on their vehicle does not cause a failure to meet emissions standards.
UpRev Standard includes an Uprev cable to reflash and communicate with the vehicle through the OBDII Diag Port. UpRev Standard also includes Map Switching allowing you to use different tunes for different situations.
UpRev Standard is a licensed-based system meaning your license will be transferred to the first ECU that is flashed. This vehicle can then be flashed as many times as the user wants, but the flash will not work on any different vehicles. One additional license can be purchased for enthusiasts that may have more than one vehicle, contact us for details.
Parameters that we can tune include:
- Up to 5 Maps on cruise control-equipped vehicles (Only RPM adjustments up to 5RPM MAPs without ARC features)
- Map switching may not be possible on all 2013+ models. Z1 is aware of an issue and is awaiting a resolution from UpRev.
- Idle RPM
- Speed Limiter
- Electronic Throttle Control to achieve Wide Open Throttle at all speeds.
- Rev Limiter
- AFR Targets
- Fuel Compensation
- Ignition Timing Advance
- Cam Phasing for equipped vehicles.
If purchasing an E-Tune in the product options, please read THIS LISTING first! Additional fees may apply. Call for details.
When emailing logs please include mods, requested maps & the following log data:
- AFR Bank 1 and Bank 2
- AFR correction Bank 1 and Bank 2
- Base fuel schedule
- Calculated load
- Coolant temp
- Engine speed (RPM)
- Ignition timing advance
- Knock strength
- Hi Det flag
- Throttle position (either one)
- MAF voltage
- Gms/sec
Logs should be performed on a car that is up to operating temp and has idled for at least one minute. Log pulls should be from at least 3rd gear for manuals, and 2nd gear or higher for automatic cars.
Please understand that not all Nissan Trucks ECU's have ROM's currently available. In the case that your ROM is not available, it has to be sent to UpRev and may take an additional 6-8 weeks to complete.
Minimum system requirements Windows 10 recommended minimum 8GB ram.
**ONLY FOR GAS POWERTRAIN-EQUIPPED VEHICLES**
 |