Organic molybdenum-based engine oil treatment to reduce friction and anti-wear for the life of your engine.
Rapid-acting organic molybdenum oil additive
- Mo-DTC, an organic molybdenum friction reducer, reduces the friction coefficient of the internal parts by 50% compared to the utilization of engine oil itself. You will experience a quieter engine noise and improved engine response immediately.
- In this product, the rapid effect is enhanced by the addition of an effect booster.
Prevents wear and tear on Pistons, Connecting Rods, Crankshaft, and some internal parts of the engine
- The strong oil film created by HKS original base oil blend has a synergistic effect with the friction reducing effect of Mo-DTC and protects the engine components from wear. Especially effective for dry starts.
Highly recommended for...
- If your cars mileage has increased and you are concerned about engine mechanical noise (The friction reduction effect reduces the engine noise)
- Engine overhaul carried out (The anti-wear effect prevents galling of new parts)
How To Use
- This product contains 200ml
- Stop the engine and add 1 bottle of this product to 3-5 liters of engine oil (Add 3-6% of ADD-II to engine oil)
- The size of the container is designed to have enough room to prevent spillage during injection
The friction coefficient is reduced to less than 50% compared to engine oil without ADD-II!
- Just engine oil - 0.14
- Engine oil with ADD-II - 0.06
|
Fuel Economy Test
*Measured on the same route and under the same conditions (driving distance: ~300 km)*
|
| |
Fuel Consumption (miles per gallon) |
| Without ADD-II |
32.58 |
| With ADD-II |
33.19 |
Cannot be used on two-stroke engines or motorcycle. Cannot be used in vehicles where the engine and transmission share the same oil, even in four-wheeled vehicles.(ex, Rover Mini).*Hazardous material (Molybdenum and its compounds), May be fatal if swallowed and enters airways
Ships in 200mL bottle.
 |