- Performance Parts
- Fuel System
- Fuel Pumps
Product Description
These Walbro high output in-tank electric fuel pumps produce flow ratings of 255 liters of fuel per hour. These particular pumps flow significantly more fuel at higher pressure. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. These are complete fuel pump kits and include all drop parts and accessories. Also included is an inlet filter that meets or exceeds original equipment specifications and provides improved filtration and durability.
Note: This is a universal fuel pump. Some modification may be required.
 |
check_circle_outlineAdded to cart
=
Tomei Adjustable Fuel Pressure Regulator - Type S
starstarstarstarstar (1)
$108
Tomei Fuel Pressure Gauge
starstarstarstarstar (1)
$43.20
Greddy Profec Boost Controller
$408.50
OEM Nissan Oil Drain Plug Washer
starstarstarstarstar (34)
$0.98
Z1 Motorsports 3D "Z1 Emblem"
starstarstarstarstar_half (52)
$6
Aeromotive 0 - 100 psi Fuel Pressure Gauge
starstarstarstarstar (4)
$51.95
Can this fuel pump replace my own fuel pump that's on my g35?
This pump is a higher output but will fit.
Drilling of the siphon jet on the assembly to keep base pressure stock may be needed.
Regards,
The Z1 Team
Can this pump be installed into any Z32 with no modifications? I will be installing this into an NA 2+0 fuel tank, with a TT swap. Does the various speeds of the pump or wiring of different models have any effect on the installation of this pump?
It will go right in without modification on a 2 seater.
The pump controller is what manages speeds and you will still have 2 speed control. We recommend having the NA ecu socketed and upgraded for the swap.
Regards,
The Z1 Team
If this is used to replace the OEM pump in a G37, can it be installed without any modification? Will the increase in fuel pressure cause problems further down the line, i.e. the injectors? Thanks
We would recommend adding the CJ install kit at the same time.
Available here:
(Link)
We have not seen any issues develop with injectors.
the whalbro 255 fuel pump for nissan 350z is plug and play or do i need to make modifications for installation?
Fitment into the assembly is similar to stock. We would recommend adding a new pump grommet
(Link) and tank O-ring
(Link)
Also you may need to step up the size on the siphon jet if your base fuel pressure is too high. We usually handle this on a case by case basis depending on the fuel system.
I currently have the VHR manifold swap on my 350z HR. In the VHR fuel rail I am running R35 injectors
I want to retune my car on e85 and would wanna know if any modifications are needed for this fuel pump to go in my Z
When installing a higher flow pump most will slightly oversize the siphon jet orifice to keep base pressure from being too high. Also it is a good idea to pickup a new pump grommet
(Link) and tank o ring at the same time.
(Link)Is this pump plug and play for a 2012 370z Touring or do i need to make modifications for installation? Thanks!
You will probably need some minor trimming but we recommend the CJM Fuel Pump install kit with it found here
(Link)
And the Bulk head O-ring found here
(Link)AEM 340 LPH E85 Fuel Pump
starstarstarstarstar_half (10)
$129.95
Walbro HELLCAT 525 lph In Tank Fuel Pump E85
$151.79
Aeromotive 340 LPH Stealth E85 Fuel Pump 11542
$144.95
Walbro 400LPH In-Tank Fuel Pump Kit
$191.96
255 LPH Drop-In Fuel Module Assembly
$429.95
NISMO High-Flow Volume Fuel Pump - 1.3L/min
$173.25
starstarstarstarstar
Sean
October 16, 2023
Gave me that good sounding walboro buzz and all the fuel I need
starstarstarstarstar
James
September 3, 2023
Worked well. I had to sand down the edges on the bottoms to get it to fit into my fuel tank assembly, but other than that no issues. The last Walbro lasted 15 years. Hopefully this one is just as good.
starstarstarstarstar
Alexander
June 1, 2023
worked perfectly. needed to shave off some of the plastic on the pump to make it fit in the fuel pump housing for my 06 350z, but other than that would recommend this pump!
starstarstarstarstar
Hayden
May 11, 2023
Great pump for what i needed, still functioning after 3 years of HARD driving and 9hr road trips.
starstarstarstarstar
Aj
April 13, 2023
Fits perfectly runs amazing the difference is night and day amazing product
starstarstarstarstar
Aj
April 13, 2023
Fits perfectly runs amazing the difference is night and day amazing product
starstarstarstarstar
Anthony
April 2, 2023
Was hard to find but Z1 had it and got it to me asap!!
starstarstarstarstar
JUNIER
November 29, 2022
is a great upgrade to any 350z specially for a 2005 , easy and faster installation
starstarstarstarstar_border
Lazaro
September 11, 2022
The instructions for installing it in a G35 are not correct
starstarstarstarstar
ALEXANDER
August 3, 2022
Super easy install, pump is bit more quiet than stock and definitely could feel the difference between my 30 year old oem pump that was on it's way out and this.
starstarstarstarstar
Brian
April 6, 2022
We’ll put together kit however you will have to do some trimming to the fuel assembly and replace the hose as it’s to small and will link up i just matched one at auto zone and got a foot for like $5
starstarstarstarstar
Daniel
December 2, 2021
it’s a walbro! expect the best
starstarstarstarstar_border
Connor
September 11, 2021
So replacing my oem ENR34 fuel pump and I came across one fitment issue. The pump hanger has a metal fuel line part and the top of the pump buds up against it having 0 room for the hose in between. I’m going to have to cut off some of that metal line for this to work properly. Also it did come with an extra wire but thankfully the oem wire I have fits into the pump fine without modifying it.
starstarstarstarstar
Jack
July 27, 2021
Great product. Easy to install, straight bolt in.
starstarstarstarstar
Scott
May 27, 2021
Car has better response and speed.
starstarstarstarstar
Robert
March 26, 2021
The Walbro 255 was easy to install and works well compared to the OEM fuel pump.
1991 Nissan 300ZX NA 2+0
starstarstarstarstar
Michael
February 28, 2021
Some modification of the pump needed to be made, as in all upgrade pumps, but the device and kit was installed and working in my 2003 350Z in under 1 hour.
starstarstarstarstar
Darian
January 25, 2021
Pretty straight forward install, just make sure you get everything secure the first time around so you don’t have to keep going back in. The hose that walbro sends is a bit shorter than what most Z32 users recommend, you usually want the fuel filter at the bottom to reach the bend in the metal arm of the FSU, but this sits a little higher. In general, great fuel pump for replacing oem or for upgrades if you’re looking for tuning
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF