OEM 2020 Nissan Titan Tailgate Finisher - PRO4X

OEM Tailgate Finisher Trim for the 2020+ Nissan Titan equipped with the PRO4X package.

90810-9FV0B

This finisher will only fit previous year Titans will little modification to the finisher, and no modification to the vehicle's tailgate. If you want to add this finisher to the 2016 to 2019 Titans then follow these steps.

1. Carefully remove the Nissan emblem from your tailgate and set it aside for it will be used in a later step
2. Remove the plastic dowels on the backside of the finisher with a razor blade or a tool of your choice
3. Apply double sided mounting tape to the outer perimeter of the finisher that will be mounted to the tailgate
4. Ensure the tailgate's surface is clean and dry to ensure a proper adhesion for the mounting tape
5. Align the finisher to the tailgate and press firmly around the outside to assure the mounting tape is adhered properly
6. Apply a glue of your choice to the backside of the emblem you removed earlier from your tailgate
7. Use the factory notches on the emblem to align it to the finisher and press the emblem firmly in place

Note: This finisher does not include a new "Nissan" emblem

The Platinum Reserve tailgate finisher can be found HERE!

**This finisher must be modified to fit previous models and cannot be returned after modifications have been made**