OEM Rack and Pinion for the 2016-2020 Nissan Rogue (Japan Make).
The Steering Rack and Pinion, is an assembly in your vehicle that allows your wheels to rotate from side to side when you turn your steering wheel. A malfunctioning rack can cause your steering to either be loose or tight. Other symptoms of a failing Rack and Pinion, include: steering wheel shakes, clunking noises, wheels not returning to the center, and excess slack. All rack and pinion assemblies are shipped with new inner tie rod boots and inner tie rods. All you'll need is a pair of outer tie rods, rack mount bushings, fluid, and labor time to complete the job.
Return the power back to your power steering by replacing your old or broken Steering Rack and Pinion with this genuine Nissan replacement!
Fits:
- 2016-2020 Nissan Rogue (T32)
- Japan Make ONLY
- Does NOT fit Rogue Sport models.
NOTE:
- There is a core charge associated with this product. Your core must be returned in the original box with a completed Core Return Form. Cores must include inner tie rods, all in re-build-able condition. Dents in the cylinder and bent, broken, or missing components will result in a deduction from the full refund of the core charge. All cores are required to include the external metal hard lines that are attached to the rack in good condition. If these metal hard lines are missing or damaged you will not receive full core credit.
Please carefully review the information below before ordering this rack & pinion. These assemblies differ depending on year / what country your Rogue was manufactured in. It is important that you verify your VIN to ensure the correct part is selected.
Please confirm the country of manufacture for your Nissan Rogue by referring to the first 3 digits of your Vehicle Identification Number (VIN). Refer to the following diagram to locate your VIN.
- VINs that start with JN8, select Manufactured In Japan.
- VINs that start with 5N1, select Manufactured In USA.
- VINs that start with KNM, select Manufactured In Korea.
 |